98.

At this time, your drawing on the previous page should look like the one shown below.

facts:

When the conductor is in the

neutral plane, no lines of

forces are cut and zero

voltage is induced in the

conductor.

On the drawing at right, label

the right end of the X axis 0.

Label the left end of the X

axis 180.

When the conductor is at 90,

lines of force are cut at

maximum rate and maximum

voltage is induced in the

conductor.

Label the top end of the Y axis 90.

Label the bottom end of the Y axis 270.

Label each end of the Y axis 100 volts (maximum voltage obtainable).

To complete the drawing, draw a line from the point of origin where the axes cross to

conductor symbol.

This line forms a rotating vector; attach an arrowhead and label the line r.

Note: The length of the vector will coincide with the length of the y axis. At 90,

maximum voltage is generated. We have assumed 100 volts to be the maximum voltage

this generator can deliver.

Label the length of the vector 100 volts.

Check the accuracy of your work on the next page.