(5)
Sampler Blood Agent Test Spot.
Check the sampler Blood Agent test spot.
If test spot is pinkish,
replace sampler.
(6)
Sampler Detectors.
Check for four or more samplers in the kit.
If less than four, obtain
a new M256A1 Chemical Agent Detector Kit.
b. Inspection During Use.
Examine for broken or missing ampoules, missing spots, or crushed
reagent channels. Dispose of sampler detector, if any of these
conditions exist.
c. Inspection After Use.
(1)
M8 Chemical Agent Detector Paper.
Check to verify that M8 Chemical Agent Detector Paper is present. If
missing or less than five sheets, replace M8 Chemical Agent Detector
Paper.
(2) Sampler Detector.
Check for four or more samplers in the kit.
If less than four, obtain
a new M256A1 Chemical Agent Detector Kit.
4.
Preparing the Sampler for Use.
Step 1.
Remove the operating instruction cards from the kit.
Read the instructions on the three operating
instruction cards before proceeding.
Step 2.
Remove a sampler protective bag containing a sampler
from the kit.
WARNING
Do not use sampler that is outdated or one from a sampler
protective bag that is punctured, ripped or torn, because
it will give unreliable test indications.
Step 3.
Read the instructions on both sides of the sampler
protective bag before proceeding.
IS0345
4-14
Previous Page
