G. BY NOW YOU HAVE CLEANED LOOSE DUST AND DIRT FROM THE
RECEIVER-TRANSMITTER CASE WITH A SOFT CLEAN CLOTH - YOU
HAVE CLEANED ALL RECEPTACLES AND REMOVED THEIR COVERS.
4.
NOW, WE WILL CHECK
THE
CONTROLS
AND
FOR
LOOSENESS AND DAMAGE ...
A. THERE ARE TWO ANTENNA CONNECTORS.
INSPECT BOTH FOR SIGNS
OF LOOSENESS AND DAMAGE.
B. THE SMALLER OF THE TWO ANTENNA CONNECTORS IS USED WITH
ANTENNAS THAT ARE NOT SUPPLIED AS A PART OF THIS RADIO
SET. REPLACE THE COVER ON THE SMALL ANTENNA CONNECTOR.
C. THE LARGER OF THE ANTENNA CONNECTORS IS THE ONE THAT YOU
WILL USE DURING THIS LESSON ...
D. NEXT, INSPECT THE POWER PLUG FOR BENT OR BROKEN PINS. --
REPLACE THE COVER BY PUSHING DOWN WHILE TURNING IT
CLOCKWISE. YOU WILL FEEL IT LOCK INTO PLACE AND YOU MAY
ALSO HEAR A "CLICK" SOUND.
THE RADIO WILL NOT OPERATE
FROM THE BATTERY UNLESS THE COVER IS IN PLACE.
E. CHECK THE BAND SWITCH FOR LOOSENESS OR BINDING.
F. CHECK THE AUDIO CONNECTORS AND COVERS FOR LOOSENESS AND
DAMAGE.
G. CHECK THE
VOLUME
CONTROL
FOR
INTERIOR
AND
EXTERIOR
BINDING.
7
Previous Page
