b. Confidence Test.
After the self test, you must perform the confidence test.
CAUTION
Nozzle protective cap assembly MUST BE stored on
environmental cap when not on the front of the CAN. DO NOT
touch nozzle assembly or the new filtered nozzle standoff;
touching could contaminate them.
(1) Remove the nozzle protective cap from the front of CAM
and place the protective cap onto the environmental cap, and twist
clockwise (Figure 4-33).
Figure 4-33.
Removing Protective Cap
(2) Place a filtered nozzle standoff onto the nozzle, without
touching the filter with your hands.
(3) Remove confidence tester from carrying harness and
perform H confidence test first, by opening the H vapor shroud of
confidence tester (Figure 4-34).
(4) Insert CAM nozzle in H end of confidence tester for one
second (Figure 4-34).
IS0345
4-38
Previous Page
