package, to prevent contamination from entering, and is used as a
replacement when original carrying harness and/or straps are either
damaged or contaminated. Harness assembly and straps are replaced
rather than decontaminated (Figure 4-26).
d. Filtered Nozzle Package Assembly.
Filtered nozzle standoffs prevent nozzle assembly from being
contaminated by liquid agents. Filtered nozzle standoffs are fitted
with filters which prevent entrance of dust. Filtered nozzle
standoffs are throw away items. Two packages are housed in carrying
case assembly and two are housed in the carrying harness; each package
contains six standoffs (Figure 4-26).
e. Spare Battery.
Lithium-sulfur dioxide battery is housed in carrying harness pocket
(Figure 4-26).
f. Large Handle Strap.
Attaches to rear of CAM handle.
Carrying harness clips to the strap
(Figure 4-26).
g. Small Handle Strap.
Attaches to front of CAM handle.
Carrying harness clips to the strap
(Figure 4-26).
h. Confidence Sample.
It is used to test the CAM for its ability to detect G and H. The end
with a round cross-section is marked G and contains Nerve Agent
Simulant. The end with three longitudinal ribs is marked H and
contains Blister Agent Simulant. It is housed in a carrying harness
pocket (Figure 4-26).
i. Nozzle Protective Cap.
The nozzle protective cap seals the container housing a spare nozzle
protective cap assembly. A nozzle protective cap assembly cleans air
circulating inside the CAM (Figure 4-26).
4-29
IS0345
Previous Page
