Instructional Content cont'd

Operation of Radio Set AN
Page Navigation
35

CHECK TO MAKE

SURE THAT THE STRING RUNNING THROUGH THE ANTENNA IS

UNDER SPRING TENSION...ALSO CHECK TO INSURE THAT THE

METAL COVER ON THE SMALL END OF THE ANTENNA IS SCREWED

TIGHT.

(D) JOIN THE LONG ANTENNA AND THE ANTENNA SUPPORT BY

SCREWING THEM TOGETHER...YOU WILL BE REQUIRED TO

INSTALL THE LONG ANTENNA ONLY IF OUT-OF-DOORS...IT

SCREWS INTO THE ANTENNA MOUNT JUST LIKE THE SHORT

ONE...WE HAD TO MAKE CERTAIN THAT YOU COULD ASSEMBLE

IT WHEN THE NEED ARISES.

(E) THERE ARE A FEW POINTS THAT YOU NEED TO KNOW ABOUT THE

DISASSEMBLY, SO LET'S BEGIN. START WITH THE SMALL END

OF THE ANTENNA...GENTLY PULL THE TWO END SECTIONS

APART....CAREFUL! DON'T BREAK THE CORD...THEN CONTINUE

SECTION BY SECTION TOWARD THE LARGE END...WHEN ALL

SECTIONS HAVE BEEN SEPARATED AND FOLDED. UNSCREW THE

ANTENNA FROM THE SUPPORT. STORE THEM IN THE BAG.