Activate First Heater Ampoule (Figure 4-20).
DO NOT USE HEATER PADS.
Swing heater immediately over test spot.
(10) After two minutes, swing heater away from test spot
(Figure 4-20). Swing protective strip away from test spots.
Figure 4-20. Activate Heater Ampoule and
Swing Heater from Test Spot
(11) Place sampler under box or can for about 10 minutes
(Figure 4-21). The instruction side should be face up.
(12) After 10 minutes remove sampler from box or can.
sampler by the protective strip.
Place Detector under Can or Box
(13) Activate second heater ampoule (Figure 4-22).
heater immediately over test spot.